Shopping Cart

0 item(s) - $0.00
Currency: $ $ Col$ kr $ $ kr £ $ kr CHF $
Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick Self Adhesive Removable Backsplash Wall Tile Stickers - 10 x 10.5 (10-Pack) - B071P4FB4N
Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick Self Adhesive Removable Backsplash Wall Tile Stickers - 10 x 10.5 (10-Pack) - B071P4FB4N Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick Self Adhesive Removable Backsplash Wall Tile Stickers - 10 x 10.5 (10-Pack) - B071P4FB4N Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick Self Adhesive Removable Backsplash Wall Tile Stickers - 10 x 10.5 (10-Pack) - B071P4FB4N Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick Self Adhesive Removable Backsplash Wall Tile Stickers - 10 x 10.5 (10-Pack) - B071P4FB4N Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick Self Adhesive Removable Backsplash Wall Tile Stickers - 10 x 10.5 (10-Pack) - B071P4FB4N

Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick Self Adhesive Removable Backsplash Wall Tile Stickers - 10" x 10.5" (10-Pack) - B071P4FB4N

Product Code: B071P4FB4N
Availability:
In Stock
Price: $40.88 $40.99
Qty:  

This fits your .
  • Enter your model number to make sure this fits.

  • QUICK & EASY TO INSTALL: Easy PEEL & STICK Application saves you time on your DIY Backsplash Project. (Simple STICK ON / SELF STICK Application). No need for grout or additional glue / No need for special tools or trade skills. Great for Kitchen, Bathroom, Office, and RV’s.

  • EASY TO CLEAN / LONG-LASTING: Each sheet is coated with epoxy resin for OIL, WATERPROOF, and CRACK-FREE, TEXTURED Surface. Stains can be easily wiped off using a damp cloth or mild household cleaning agents.

  • LOW PROFILE & EASY TO WORK WITH: Each tile sheets are only about 0.1 cm thick, so you can install them over your old tiles if needed. It can be bent and cut to desired shapes and sizes with a pair of scissors. Yet, they are extremely tear resistant. Premium glue backing allows it to be for a permanent use. However, they are removable using a hair dryer or a heat gun.

  • PREMIUM QUALITY / ECO-FRIENDLY / NON-TOXIC: [EPOXY coated VINYL STICKER TILE SHEETS / Textured Surface] Special Premium Quality Glue and Backing Material prevent them from peeling or turning color over time.

  • TIPS FROM FREQUENT INQUIREIES: Application surface MUST BE CLEAN (free from dirt and oil) and FULLY DRIED before installing these tiles. Please read further in the description section for suitable application surfaces. Each tile measures 10” x 10.5” (10” x 10” when installed due to overlapping edges). These tiles are NOT intended for showers or bathtubs.

  • Package Quantity:10  |  Color:A091

    UPDATED INSTALLATION GUIDE
    There is NO MORE NEED to cut out the “Overlap Tabs”

    Thanks to your great comments and communication with us, we’ve created this QUICKER & EASIER INSTALLATION GUIDE.
    Please disregard instructions on our packaging, and USE the FOLLOWING STEPS. Our updated packaging is coming soon...

    SUITABLE SURFACES - Glass / Acrylic / Ceramic / Melamine / Flat Panel Dry Wall / Water Proof Surfaces

    NOT SUITABLE SURFACES - Rugged Wall / Un-flat Wall / Oiled Wall / Unclean Wall / Moldy Wall / Cracked Wall / Freshly Painted Wall / Showers / Bathtubs

    * Please wear a pair of gloves during installation. The glue on the backing of the tile is intended for permanent use, and is very sticky *

    1. Please refer to “Suitable Application Surfaces” listed above to ensure that they are the right fit for your project. Installing surface must be cleaned and completely dry.
    2. Using a level and a pencil, draw a top horizontal guideline for your tiles to ensure that your project comes out properly aligned.
    3. Cut out the inter-locking grooves of your first tile. (Opposite side from the “overlap tabs”)
    4. Peel off the backing and apply your first tile with the side that you just cut facing OUTWARD. Align the tile to your guideline prior to installing it as it cannot be adjusted after it is stuck on the surface.
    5. Remove the plastic film on the face of the tile.
    6. No cutting is required for your consecutive tiles. Install them inter-locking the grooves to the “overlap tabs”.
    7. Allow 24 hours to cure.

    Tip:
    - Apply your first tile on the top right (or top left) corner to make it easier.
    - Install the tiles in horizontal layers, working your way from the top layer to the bottom.
    - The last tile for each layer should be cut to size prior to installation for your ease. (Same goes for all tiles on the bottom horizontal layer)
    – Firmly press on the tiles prevent them from lifting over time.

    Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick Self Adhesive Removable Backsplash Wall Tile Stickers - 10" x 10.5" (10-Pack) - B071P4FB4N

    Powered By nohillary16.net © 2020
    Notice: Undefined variable: statistical_code in /home/nohillary16/public_html/vqmod/vqcache/vq2-catalog_view_theme_qlylv_2_template_common_footer.tpl on line 18